📈 Pressure Advance Notes

🧠 What it Fixes

• Corner blobs / bulges
• Inconsistent line width after speed changes
• Over-extrusion at direction changes
• Better edges at higher speeds

⚙️ Starting Value Wizard

This gives a safe starting point so you can fine-tune with a PA test print.

📊 Recommendation

📄 Ready-to-Copy Commands

✅ Quick Test Workflow

1. Print a Pressure Advance / Linear Advance test pattern (line or tower) at your normal speeds.
2. Look for the sharpest corners with minimal bulge and no corner gaps.
3. If corners look “fat” → increase PA/K slightly. If corners show gaps → decrease slightly.
4. Re-test after changing nozzle/material or big speed changes.